carbon fiber quartz tubular heat lamp in TH VN US

June 5, 2026

The Carbon Fiber Quartz Tubular Heat Lamp: A Tough Little Workhorse for TH, VN, and US Shops

We built this carbon fiber quartz tubular heat lamp for one reason: to be a seriously tough, high-intensity infrared heater that gets the job done. Think industrial heating, curing, and drying—where you need serious heat, fast. The secret is the carbon fiber element tucked inside a quartz tube. It fires up almost instantly and holds its temperature steady. And that tubular shape? It slips into all those awkward, tight spots where a flat panel just won’t fit.

Power, Voltage, and Size: The Real-World Details

Here’s the thing about industrial work—you need gear that plays nice with your local power. So we made this lamp to handle the voltages you’ll find in Thailand, Vietnam, and the US. That means it runs on 120V, 220V, or 240V, with power ratings from 500W all the way up to 2500W. The length is flexible, too—you can get them from 300mm to 1200mm. That lets you dial in the watt density to exactly what your process needs. Now, high watt density means you pack a lot of heat into a small space. Powerful, for sure. But it also means you need to plan for proper airflow and manage the heat inside your machine.

What It’s Made Of (And Why It Matters)

The quartz glass is the real unsung hero. It handles those brutal temperature swings without breaking a sweat, and it lets that shortwave infrared heat pass right through. Because it has low thermal mass, it heats up and cools down quickly. Inside, the carbon fiber element doesn’t just resist oxidation—it holds its resistance steady over time. That’s the kind of detail that prevents those frustrating hot spots and burnouts. We also added a reflective coating to push more energy forward, where you need it. And the whole thing uses a standard R7s double-ended connector, so it’s a straight-up drop-in replacement. Just wire it up, line up the pins, and you’re good to go.

Where It Shines (And How to Keep It Running)

Need to heat plastic, cure a coating, activate an adhesive, or seal some packaging? This lamp is your go-to for fast, localized heat. You get high heat density, a near-instant start, and an installation that doesn’t make you pull your hair out. Just a couple of quick tips to keep it happy: make sure you match the voltage correctly, and plan for proper cooling. If the voltage is wrong or the airflow is poor, you’ll shorten the life of the element. Simple as that.