The Carbon Fiber Heater Lamp: Straight to the Good Stuff
Let’s talk about the carbon fiber heater lamp. We built it for one reason: to give you serious infrared power in a tight space. It’s simple on paper. 400V input. 2500W of output. And a 300mm tube. But that combo is exactly what makes it feel snappy. It heats up fast, so you’re not waiting around for the machine to catch up. And because it runs at 400V, the wiring is easier. You don’t need oversized cables. Just cleaner, simpler connections.
Why Halogen + R7s Makes Sense
Inside, the carbon fiber filament lives in a halogen-filled quartz tube. The halogen keeps things stable when the heat is cranked up, so performance stays steady instead of drifting over time. And the quartz? It takes the thermal shock without flinching, while letting infrared through cleanly. The R7s connector isn’t flashy, but it’s practical. It gives you solid contact at both ends of the tube, and it makes swapping the lamp quick—no tools needed. If your machine layout calls for something different, we can set you up with SK15 or another connector that matches your terminal block and clearance.
Where It Shines—And What to Keep in Mind
In jobs like PET blowing, this lamp focuses infrared right where you need it. The 2500W packed into 300mm gives you a strong heat punch, which is exactly what you want for fast surface heating. But here’s the honest part: that kind of density means nearby parts feel the warmth. So you’ll want proper shielding, airflow, and a little cooling capacity to keep your electronics and insulation safe. Run it at the rated voltage, use the right connector, and it’s just dependable heat you can count on—and service when you need to.