carbon fiber ir heat lamp for paper drying 800w/1200w

carbon fiber ir heat lamp for paper drying 800w/1200w

Carbon Fiber IR Heat Lamps for Paper Drying: 800W and 1200W, Built for the Real World

We built these carbon fiber infrared heat lamps with one purpose: to make paper drying lines move faster and smoother. You’ve got two power options—800W and 1200W—so you can match the lamp to your line speed and how thick the sheet is.

Power and system setup: pick what your line actually needs

The 800W and 1200W ratings were chosen to deliver serious heat without overworking your control gear. Think about the space you’re heating, and size the lamp accordingly. If you run a 1200W lamp in a tight drying zone, you’ll get faster solvent removal. That’s the upside. The catch? Higher inrush current and a need for tighter thermal management. So plan your electrical layout and airflow ahead of time. That’s how you keep the reflector and nearby parts from getting too hot.

What’s inside: carbon fiber IR emitters that just work

The carbon fiber elements respond quickly and hold steady output across the short-wave IR band. The quartz envelope handles the shock of start-up and shut-down cycles. And the result? Consistent output over long runs, so you’re not constantly chasing changes on the paper surface.

On the paper line: fast drying without burning the sheet

On the line, the goal is simple: drive off moisture fast—without scorching the paper. Short-wave IR penetrates the surface and heats from the top down, which helps reduce curl. Go with the 800W option when you’re running slower lines or need to cover a narrow zone. Step up to 1200W when you need more heat per unit length to keep up with higher throughput. Installation is straightforward, and the footprint fits right into standard drying modules. And once you set it up, you can count on the same drying profile shift after shift.